1992 Camaro RS 25th Anniversary
Engine:
~GM Performance Parts Crate 350 H.O. Long Block
Stock w/o performance mods. rated at:
~290 horsepower @ 5100 RPM
~326 lb-ft. of torque @ 3750 RPM
on 87 octane fuel.
~4-bolt mains, PM steel rods, strong cast-aluminum
pistons.The camshaft has .450" intake and .460"
exhaust lift with hydraulic flat tappets.
~The cast iron cylinder heads have 1.94" intake and
1.50" exhaust valves wit 76 cc combustion chamber.
~Ported/Polished TPI Upper/Lower Intake plenum/tubes
~Ported/Polished Throttle Body
~Venom 24# fuel injectors
~Gutted factory TPI airbox
~160 Thermostat
~A/C Delco RapidFire plugs
~MSD 8.5mm Ignition Wires
~Accel Ignition Coil
~Underdrive pulley W/ serpentine belt (was dynoed
at 290 hp and 326 tq w/o this setup!)
~Energy Suspension Motor Mounts
~Moroso chrome breather
~Dynomax Shortie headers
~Bosch Oxygen Sensor
~Felpro header gaskets
~Custom Y-pipe
~Catalytic Convertor delete
~Custom 3" pipe from Y-pipe back
~Heartthrob 3" x 12" glasspack
~Custom DIY PROM w/ Axcn.BIN and axxd.bin as base for tuning
~Using Tuner Pro R/T For tuning
Transmission:
~Borg Warner World Class T-5 5-Speed Manual Transmission
~Center Force Dual Friction clutch set-up
~Hays Billet Racing Flywheel
~Energy Suspension Transmission Mount
~Energy Suspension Torque Arm bushing
Rear-End:
~2002 Camaro SS rear-end
~Zextel Torsion HD Traction unit
~Motive Industries 4.10 Ring and Pinion Set
~T/A Performance Aluminum Girdle
~Motive Industries Install Kit
~Welded axle housing to axle tubes
~Mobil 1 synthetic gear oil
Brakes/Suspension:
~Drilled and Slotted Front Brake Rotors
~Ceramix ceramic Front Brake Pads
~Napa Premium Front Calipers (both sides)
~Napa Hardware Kit
~Energy Suspension Front Swaybar end-links
~Energy Suspension Front Swaybar bushings
~Energy Suspension Rear Swaybar end-links
~1996 Camaro Z-28 rear brake setup
~Energy Suspension LCA bushings, Panhard-rod
bushings, RCA Bushings
~Energy Suspension Front LCA bushings and UCA
bushings
Chasis:
~Home Made Sub-frame Connectors
~Home Made boxed-in LCA
~Lakewood adjustable panhard-rod arm
Stereo/Interior:
~Alpine CDA-9813
~2002 Camaro v-6 dark-grey cloth power seats
~Converted to all black interior (used to have light grey interior)
Exterior:
~Eagle Alloy Series 185 17x8 all around
~Sumitumo HTRZ II 255/40R17 on rear
~Kumho 215/45R17 on front
~1984 Camaro Z-28 STOCK fiberglass hood
~Custom Molded plastic rock deflectors/mud flaps
~Custom mounted/Installed Clearance lights under rear of car(hooked up To brakes.)
